ELFCULB Starlink Cable Routing Kit,Starlink Wall Grommet for 1" Wall Hole,Starlink Cable Feed Through Bushings,Wall Bushing for Starlink Ethernet Cable,Starlink Accessories(2 Pcs)

1" hole , fits tightly with a 6awg wire

Great

Worked as suppose to.

These are well made solid thick plugs but they are not correct for the Starlink cable in that the center hole is about 1/16" too big so it is not a tight fit. I will make it work with silicone, but if you can find a true 1/4" or slightly tighter interior hole it will seal better. I also found drilling a 1" hole was too big. They fit sloppily instead of a tight wedged in fit. Again a lot of silicone should do the job, but you really shouldn't have to do that.

FAST SHIPPER

These seem to be well made and worked perfectly with our cable. Snapped on easy and fit really good in a 1” hole. Silicone is the way to go. Not plastic which disintegrates over time.

This isn't actually a kit, a kit would include drill bits and other pieces to do the whole job. This is just the split rubber bushings that snap over the Starlink cable and then push into the holes where the cable passes through a wall, or something else, to dramatically limit other things like insects and weather to pass through too. I bought two sizes, ½" through the house, and 1" to cap off the ends of the plastic conduit I ran underground from my antenna to the house. They both worked great.

I tried another brand that broke apart when I tried to put in the wall these work just as advertised

Work very well, all parts needed are in kit. Just be cautious of what you are drilling into.

This item worked like a dream. I had to modify it to get it to fit in the hole I drilled, but the product is perfect.